Application : | Reducer allows a PG threaded gland to be terminated in enclosures with dierent entry thread form (ET NPT BSP BSPT) |
Function : | Reduce the entry thread diameter of enclosures |
Material : | Brass BS 2874 CZ121 Pb3 |
Threads : | Metric (ISO), ET, NPT, BSP & BSPT |
Finish And Plating : | Natural Brass, Nickel, Chrome (CP), Zinc (ZP), Tin (TP) |
Application : | Stop Plug may be used to close thread entries or means of sealing & stopping unused thread entries in flame proof enclosures. |
Material : | Brass Casting BS 2874 Aluminium Alloy & Galvanized Steel. |
Ingress Protection : | IP66 (with Nickel Thread Seal) IP68 (3 bar-with Nitrite 0 Rings). |
Threads : | ET, NPT, BSP, BSPT & PG |
Finish And Plating : | Natural Brass, Nickel, Chrome (CP), Zinc (ZP), Tin (TP). |
Application : | Brass Locknuts are traditional components used in fastening glands to the gland plate & as they are identical material to the gland, corrosion eects are minimal. |
Function : | Standard With ISO metric thread. To secure only brass cable glands to a gland plate. |
Material : | Brass BS 2874 CZ121 Pb3, Steel, Galvanized Aluminium Alloy (BS 1476). |
Threads : | ET, NPT, BSP, BSPT & PG. |
Finish And Plating : | Natural Brass, Nickel, Chrome (CP), Zinc (ZP), Tin (TP). |
Application : | Installed between the gland entry & equipment, provides an earth bond connection. |
Function : | Produces an earth bond connection for electrical continuity. |
Material : | Brass BS 2870 CZ123 Pb3. |
Type : | With Brass Screws & Washers, Plain Hole. |
Shapes : | Available in many shapes & thickness in all sizes. |
Finish And Plating : | Natural Brass, Nickel, Chrome (CP), Zinc (ZP), Tin (TP). |
Application : | Push on shrouds which are used to minimize the risk of dirt or foreign substances gathering on the Cable Gland Body, and/or point of cable to a gland interface. |
Function : | For all types of gland applications to provide additional protection & enhances the IP rating of the gland termination. |
Material : | PVC DIP Moulded (Black). |
Operating Temp : | -20° C to +100° C for PVC DIP Moulded & -20° C to +80° C for Injection Moulded. |
Application : | For maintaining the IP rating between equipment & cable glands it may be necessary to fit an entry thread sealing washer at the gland entry interface. |
Material : | Nitrile rubber & EPDM, PVC (Black), Silicon (Orange), Polyamide or Nylon (White), Red Fibre. |
Note : | Seals available for both external of & internal use. |